Endress+Hauser e+h大管道插入式熱式質量流量計B150
價 格:詢價
產 地:江蘇更新時間:2020-11-03 11:05
品 牌:恩德斯豪斯型 號:B150
狀 態:正常點擊量:2557
上海非利加實業有限公司
聯 系 人: 上海非利加實業有限公司
電 話: 400-006-7520
傳 真: 400-006-7520
配送方式: 上海自提或三方快遞
聯系我時請說在上海非利加實業有限公司上看到的,謝謝!
The t-mass A 150流量計專門適用于經濟型測量和常用氣體的簡單監測,特別應用于壓縮空氣。它是亞計量應用中的趨勢,堅固的***體式鋁合金外殼,使用四線制技術。有帶顯示器和無顯示器版本可選。用戶特定的設置可以保存在顯示器上,也可以通過顯示器從***臺設備傳遞到另***臺設備。
Endress+Hauser e+h大管道插入式熱式質量流量計B150優勢
適合小口徑中空氣、氮氣、二氧化碳和氬氣的測量
優化過程監測:即使在低壓和低流速中也能方便的測量
經濟型測量:安裝簡便,壓損可忽略不計,免維護
可靠流量趨勢:多變量測量
快速有效調試:引導式操作菜單
高工廠適應性:自診斷和錯誤監測
自動恢復數據,便于服務
Endress+Hauser e+h大管道插入式熱式質量流量計B150應用領域
該測量原理具有高可操作測量范圍,能直接測量質量流量
適用于小口徑管道內的空氣、氮氣、二氧化碳和氬氣測量
儀表特性
插入型適用于公稱管徑為 DN 15~ 50 (1/2 ~ 2")的管道
過程壓力可達 PN 40, Class 300
多種過程連接形式可選
***體化型帶 DC 24 V 電源供電
4-20 mA HART, 脈沖/頻率/開關量輸出
緊湊和堅固的變送器
產品參數
產品介紹
Endress+Hauser e+h大管道插入式熱式質量流量計B150特征和規格
測量原理 | 熱式 | |
主要特點 | The flowmeter for cost‐effective measurement and easy monitoring of utility gases. Suitable for air, nitrogen, carbon dioxide and argon in small line sizes. | |
特點 | Optimal process monitoring – easy measurement even at low pressures and flow velocities. Costeffective measurement – easy installation, negligible pressure loss and maintenance‐free. Reliable flow trending – multivariable measurement. Inline version: nominal diameter DN 15 to 50 (? to 2"). Process pressure up to PN 40, Class 300. | |
Transmitter features | Fast and efficient commissioning – guided operating menus. High plant availability – self‐diagnostics and error monitoring. Automatic recovery of data for servicing. Device in compact version with DC 24 V power supply. 4‐20 mA HART, pulse/frequency/switch output. | |
直徑 | DN 15 to 50 (? to 2") | |
Wetted materials | Transducer: 1.4404 (316L) Insertion tube: 1.4404 (316L) Measuring tube: 1.4404 (316L); 1.4435 (316L) Connection: 1.4404 (F316/F316L); 1.4404 (316L); 1.4435 (316L) | |
Measured variables | Mass flow, temperature, corrected volume flow, FAD volume flow | |
測量誤差 | 3 % o.r. 4 % o.r. 5 % o.f.s. (depending on chosen option of ordering feature "Calibration flow") | |
量程 | 0.5 to 910 kg/h (1.1 to 2002 lb/h) 0.5 to 1365 kg/h (1.1 to 3003 lb/h) (for air, depending on chosen option of ordering feature "Calibration flow") | |
壓力范圍 | PN 40, Class 300 | |
過程溫度 | –40 to +100 °C (–40 to +212 °F) | |
環境溫度 | –40 to +60 °C (–40 to +140 °F) | |
Transmitter housing material | AlSi10Mg, coated | |
電子插件的防護 | IP66/67, type 4X enclosure | |
顯示/操作 | 4‐line display with push Buttons Configuration via local display and operating tools possible | |
輸出 | 4‐20 mA HART (active) Pulse/frequency/switch output (passive) | |
輸入 | Status input | |
通信 | HART | |
Power supply | DC 18 to 30 V | |
防爆認證 | ATEX, IECEx, cCSAus | |
Metrological approvals and certificates | Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025), NAMUR | |
Pressure approvals and certificates | PED, CRN |